Water Softener Repairs
A common cause of water softener repair issues is the unit’s control panel. The panel is usually unresponsive and requires a simple repair. The most common part that needs to be replaced is a clip that attaches to the general electric touchpad. Another common issue is a faulty nozzle or gasket. If this is the case, you should first replace the gasket or nozzle. Otherwise, you may need to call a professional for water softener repairs.
If the valve motor is broken, a common water softener repair involves replacing the valve. The valve motor is located on the control board of the water softener and is usually connected to the timer or control head. To repair a valve motor, you will need to disconnect the wire from the valve and pull it free. Sometimes the valve motor is attached with attachment screws. Once you remove these screws, you will need to dismantle the water softener.
There are several different ways to find a water softener repair company. The most cost-effective method is to look for water treatment companies or plumbers that are licensed to do water softener repairs. These professionals can also fulfill your warranty requirements. To make sure you get the best deal, get at least three estimates and check online reviews. Also, make sure to choose a bonded and insured company. This will give you peace of mind.
Another cause of water softener repairs is a low water pressure. This can be caused by sizing issues. If the water softener is too small, check the inlet and output pressures to see if there is a problem. Another reason for low water pressure is sediment buildup. The sediment could be in the system or the resin tank. If you flush the system, you can remove the buildup. Sometimes the resin beads can be clogged and the water pressure can be restored.
If you need water softener repairs in San Antonio, Texas, contact Little Profit Water Softeners. We are local experts in water softener systems and can help you restore great-tasting water and soft, clean water. The plumbing company will repair your system to keep your water soft. We will provide a quote and schedule an appointment to visit your home or office. Our water softener repair experts will diagnose and repair the problem and fix it as soon as possible.
Another common water softener repair concern is the salt. Sometimes, the amount of salt is too high. If the tank is too salty, the water softener will not regenerate properly. This problem can also occur when the drain hose has been clogged. This will prevent the brine from being flushed out during the regenerating cycle. To avoid this problem, you should reduce the amount of salt in your water softener.
Performing water softener repairs yourself can be a complex process. Whether you’re replacing a single water softener or a whole water treatment system, water softener repairs are more complex than the average DIY repair. The costs of repairs can vary greatly. Luckily, you can save money by contacting a professional water softener repair service to inspect the system and determine the problem. If you don’t feel confident enough to tackle these tasks, you can always call a plumber to fix it for you.